Overview

DEMV Mk1 Mod created by Bobcat, Updated CrashnBurn

Updated and Converted to KSP v0.18.1 by Sequence

Extract this archive into the directory where you installed KSP (Typically KSP_Win) for Windows systems.

Or copy the contents of the folders into the like-named folders in your KSP directory.

Plugins included:

CleverBobcat.dll by Cleverwalrus

The original and still the crowd favorite, the DEMV Mk1 is a beast of a rover. It can support a five man crew and can drive indefinately on it’s internal RTG. (If you remember to turn it on)

Installation

Extract this archive into the directory where you installed KSP (Typically KSP_Win) for Windows systems. Or copy the contents of the folders into the like-named folders in your KSP directory.

How to use

Controls I/L forward/backwaed J/L - left/ right

Comments

15 Comments for “[0.18.2] DEMV Mark 1”

1. Anyone have any good tips on how to get this safely on the moon without a landing cage?

   Nate December 20, 2012

2. Perhaps try docking it below your lander

   ibrudiiv December 24, 2012

3. Hi, I cant move with rover. Yes I turned on the generator. Cant move, lights wont turn on either, help me or I will beat the shit out of my computer

   yan December 30, 2012

4. The download only contains the DEMV folder in parts. Is this correct?

   skyboss January 1, 2013

5. @ Nate
   I had the same problem too. I figured that I needed to build a frame to land it on the Mun but what I did was send it up in the stack with a probe then detach the probe top once it lands but DO NOT destroy the probe because I’m pretty sure it ends the mission and removes the rover. I had done this before the 0.18 update the same way and actually did it with a bit more and landed on Minimus. Its actually a lot easier than I had orignally thought. Good Luck!

   AF303 January 2, 2013

6. To land it I built put a Rockomax Hubmax Multi-Point Connector on the top and put fuel tanks on every spot that was open. Then I put some rockets to control the fall and that was it. When it comes to the landing phase the ship only has 16 parts on it. Also you don’t need a probe on it because the DEMV mk1 is a command pod.

   However I need help in the respect I can’t get the crew members out of the DEMV.

   The Wanderer January 6, 2013

7. Does it work with earlier versions of ksp?

   KLPNSR January 17, 2013

8. i can’t have cru in it?

   joveice January 25, 2013

9. I’m not wrtohy to be in the same forum. ROTFL

   Nona January 26, 2013

10. This is great to use as a bus around the launch pad, filling up craft and retrieving landed kerbals.

    Nixod321 January 27, 2013

11. Hey was curious do mods for 18.2 work ok in 18.4?

    James Hamell February 16, 2013

12. I absolutely love the design of this vehicle and the options it gives me. I’ve been using several Bobcat mods and I’ve loved every one of them. However, with this specific vehicle, I’m a little confused. I can’t place any crew in it whatsoever, despite launching it with zero occupants at all. Whenever I try to put a Kerbal inside, it says that the vehicle is full. Is there a chance that I somehow installed it incorrectly? Or could this be a bug? I’m using this with 18.4.

    James March 6, 2013

13. I too can’t see my crew. I know they are in there, because I put it on a SRB then smacked it into the ocean at 150 m/s and got the kill report.

    kurtu5 March 9, 2013

14. For some reason, I cant see my crew or the cockpit view. It happens as well with the Ant. Havent tried Mk2 yet but I think it’s safe to assume the drill is the same. Anyone having the same problem?

    Jose Morales April 3, 2013

15. I want to get this mod, where do I copy the file for it?

    Patrick Ryan April 16, 2013